EasyManua.ls Logo

LS LL3301 - User Manual

Default Icon
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WARRANTY CONDITIONS
Warranty Coverage:
LS Mtron Tractor Division, herein referred to as LS Mtron, undertakes to replace or repair any part of a LS
loader where damage has been proven to be caused by defects in material or workmanship.
This Warranty is valid for a period of 1 year from the date of the original retail sale. Parts replaced or
repaired under the terms of this Warranty are guaranteed only until the original warranty expires.
Warranty only applies to the original purchaser.
It is further understood and agreed that the defect should be immediately reported to the Selling Dealer.
The Selling Dealer will generally perform Warranty repairs or replacements and the Purchaser shall deliver
the LS Mtron Loader to the Dealer's place of business or repair.
The obligation of LS Mtron to the Purchaser under this Warranty is limited to the repair or replacement of
defective parts by an authorized LS Mtron dealer. Repair or replacement in accordance with this Warranty
shall constitute fulfillment of all liabilities of LS Mtron and the Selling Dealer in respect to LS Mtron
Loaders.
There are no warranties beyond those which expressly appear herein. Any implied warranty of
merchantability or fitness for a particular purpose is specifically excluding here from.
Warranty Provisions:
LS Mtron's liability under this warranty is subject to the observance by the Purchaser of the following
provisions:
The purchaser shall at all times in the operation of any LS Mtron Product, use those brands and
grades of lubricating oils, lubricants or fuel and spare parts officially approved by LS Mtron.
The LS Mtron Loaders shall have been used in accordance with the procedures specified in the
Operator's Manual. This Warranty does not extend to damage resulting from misapplication, abuse,
misuse, failure to perform maintenance, negligence, fire, accidents or changes or faulty mounting
carried out by the Purchaser. When making a Warranty exchange of parts, the Purchaser shall
compensate LS Mtron for the time that the parts have been used if they have been exposed to
extreme wear.
Compensation is not paid for physical harm, deadlock, resulting damages or other losses.
To obtain warranty service, the Purchaser must (1) report the product defect to an authorized LS
Mtron dealer and request repair within the applicable warranty term and (2) present evidence of
purchase.
The Warranty shall be void if the LS Mtron Loader has been altered or repaired outside of a LS Mtron
dealership or travel of dealer personnel to customer location for Warranty repair. The customer shall
also pay any premium for overtime labor requested by the customer.
Temporary repairs or additional costs due to the work being performed after normal working hours
will not be compensated.
The above warranty is in lieu of all other warranties on LS Mtron's behalf and neither party assumes
any other liability in connection with LS Mtron's Products.
Right to Make Design and Product Changes:
LS Mtron reserves the right to make changes in the design and other changes in its LS Mtron Products at
any time without incurring any obligation with respect to any product previously ordered, sold or shipped.

Questions and Answers

  • Y
    Yolanda JordanSep 13, 2025
    Why is the bucket cutting edge wear uneven side to side on my LS Tractor?
    • M
      Micheal DavisSep 13, 2025
      Uneven bucket cutting edge wear on your LS Tractor typically occurs because the bucket is not level to the ground. Check the rear tire inflation and adjust to level the bucket to the ground.
  • V
    Veronica WangSep 15, 2025
    Why is the bucket cutting edge wear rate excessive on my LS LL3301 Tractor?
    • N
      Nicholas BrennanSep 15, 2025
      An excessive bucket cutting edge wear rate on your LS Tractor, especially if it's even across the full width of the bucket, is often due to incorrect operational practices. Specifically, excessive down pressure is placed on the bucket when being used on hard abrasive surfaces. Refer to the operation-scraping section for correct operating procedures and utilize the float position.
  • R
    Raymond WalkerNov 17, 2025
    What to do if lift and bucket cylinders of LS LL3301 Tractor are not working?
    • N
      ncooleyNov 17, 2025
      If the lift and bucket cylinders aren't working on your LS Tractor, start by checking and replenishing the hydraulic fluid. Then, inspect and correct the hydraulic hose connections. Also, check hydraulic hoses for damage. If the issue persists, it may be due to the loader control valve or tractor main relief valve being stuck open, in which case you should check the system pressure and repair or replace the relief valve. Low system pressure supplied from the hydraulic pump can also be a cause, so check the system pressure. Inspect for broken control valve linkage and repair as required. Ensure quick disconnect couplers are fully connected. Check for any damage to hoses or tube lines that would block the flow of oil between cylinders and the control valve. If these steps don't resolve the p...

LS LL3301 Specifications

General IconGeneral
BrandLS
ModelLL3301
CategoryTractor
LanguageEnglish

Related product manuals