LS U5030 - 6-2. How to use Air conditioner and Heater

6-2. How to use Air conditioner and Heater
(1) How to operate air conditioner and heater
 Air conditioner switch
- Used for selecting the air conditioning and if you press the switch button, and If the blower control
switch is in 1, 2, 3 position, the operation lamp should be ON and the air conditioner begins to work.
 Blower control switch
- Blower is controlled by 3 stages and if blower control switch is on “0”, it stops.
 Heater control switch
- Used for selecting warm air and cool air by operating the heater control switch. If you turn the
switch clockwise (blue), the cool air blows and if counter-clockwise, the warm air blows.
Operation
lamp
Air-conditioner
switch
Blower control
switch
Heater control
switch
(2) Air direction control
 Available to control the air direction by turning the blower outlet or by adjusting the guide direction.
 For internal circulation, open the Internal circulation inlet.
 When operating the air conditioner or heater, open the blower outlet always.
Internal circulation inlet
lamp
6
6 6
6 - 2
▶ Never sleep in the cabin during the air conditioner or heater running.
It may cause suffocation.
▶ When operating in the cabin for a long time, circulate the air outside occasionally.
Caution
Blower outlet
Air direction guide
(Turning)