EasyManuals Logo

LSI LASTEM DMA867 User Manual

Default Icon
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Thermo-hygrometer with current outputs User manual
INSTUM_01378 Pag. 9/12
6 Accessories / Spare parts
Description
Mast-mounting device for Ø45÷65 mm pipe
Cable L = 10 m
Cable L = 25 m
Cable L = 50 m
Cable L = 100 m
Sensitive element (spare part)
Fan for forced ventilation shield DYA231 (12 Vdc)
Fan for forced ventilation shield DYA232 (24 Vac)
Calibration certificate
7 pin free female connector.
7 Disposal
This product is a device with high electronic content. In accordance with the standards of
environmental protection and collection, LSI LASTEM recommends to handle this product as waste
of electrical and electronic equipment (RAEE). For this reason, at the end of its life, the instrument
must be kept apart from other wastes.
LSI LASTEM is liable for the compliance of the production, sales and disposal lines of this
product, safeguarding the rights of the consumer. Unauthorized disposal of this product will be
punished by the law.
8 How to contact LSI LASTEM
In case of problem contact the technical support of LSI LASTEM sending an e-mail to
support@lsi-lastem.it, or compiling the technical support request module at www.lsi-lastem.it.
For further information, refer to addresses and numbers below:
Phone number: +39 02 95.414.1 (exchange)
Address: via ex S.P. 161 Dosso n. 9 - 20090 Settala Premenugo, Milano
Web site: www.lsi-lastem.it
Commercial service: info@lsi-lastem.it
After-sales service: support@lsi-lastem.it, riparazioni@lsi-lastem.it

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LSI LASTEM DMA867 and is the answer not in the manual?

LSI LASTEM DMA867 Specifications

General IconGeneral
BrandLSI LASTEM
ModelDMA867
CategoryMeasuring Instruments
LanguageEnglish