(
e) Detailed description for compared output
1) Mode 0 (Present value < Compared value)
■ If counted present value is less than compared value, output is sent out, and if present
value increases to be equal to or greater than compared value, output is not sent out.
2) Mode1 (Count value ≤ Compared value)
■ If present count value is less than or equal to compared value, output is sent out, and if
count value increases to be greater than compared value, output is not sent out.
o
utput
in case of
Compared Output
Min. set value
in case of
Compared Output
output signal
O
To Next Page
Loading...