LSIS XBC-DN30S - Page 203

5) Mode 4 (Count value > Compared value)
■ If present count value is greater than compared value, output is sent out, and if count value
decreases to be less than or equal to compared value, output is not sent out.
6)
Mode 5 (Compared output Min. set value ≤ Count value ≤ Compared output Max. set value)
■ If present count value is greater than or equal to compared output Min. value and less than
or equal to compared output Max. set value, output is sent out, and if count value
increases/decreases to exceed compared value’s range, output is not sent out.
123456
123457
123458
123459
123460
123461
123462
Count value
Compared Output
Min. set value
Compared Output
Enable
Compared Output
signal
External output
(
in case of
designated output
)
123459
123456
123457
123458
123459
123460
123461
123462
123458
123460
Count value
Compared
O
utput
M
in. set value
Compared Output
Max. set value
Compared
Output
Enable
Compared O
utput
signal
External
Output
(
in case of
designated output)
www.behaotomasyon.com
www.behaotomasyon.com