LSIS XBC-DR20E - Page 68

Chapter 5 Program Configuration and Operation Method
5- 17
(b) Task type
Classification
Description
Remark
Task name
Make Task name.
Character, number
available
Priority
Set the priority of task. (2~7)
“2” is the highest
priority number.
Task number
Set the Task number.
 Cycle time task (0 ~ 7): 8
 External I/O task (8 ~ 15): “S” type: 8,
“E” type: 4
 Internal device task (16 ~ 23): 8
-
Execution
condition
Initialization
Set the initial program when running the project.
Till the execution of
INIT_DONE
instruction
Cycle time
Set the cyclic interrupt.
0~4294967295 ㎳
available
I/O
Set the external I/O.
P000 ~ P007
available
Internal
device
Set the internal device to interrupt execution.
 Bit: Among Rising, Falling, Transition, On, Off
 Word: Among >,>=,<,<=
-
(c) Click right button of mouse at registered task and select『Add Item』-『Program』.
www.behaotomasyon.com
www.behaotomasyon.com