Digital Video Recorder Quick Start Guide
11
The PT Cloud can be enabled via operation on IP Portal software, PT Cloud and Web browser. We introduce the
operation steps on PT Cloud in this section.
Step 1 Go to Menu > Configuration > Network > Platform
Access.
Figure 3-9 PT Cloud Settings
Step 2 Check the Enable checkbox to activate the function.
Then the Service Terms interface pops up.
1) Create the verification code and enter the code in
the Verification Code text field.
2) Check the checkbox of The PT Cloud service will
require internet access. Please read Service Terms
and Privacy Statement before enabling the
service.
3) Scan the QR code on the interface to read the
Service Terms and the Privacy Statement.
4) Click OK to save the settings and return to the PT
Cloud interface.
Figure 3-10 Service Terms
PT Cloud is disabled by default.
The verification code is empty when the device leaves factory.
The verification code must contain 6 to 12 letters or numbers and is case sensitive.
Every time you enable PT Cloud, the Service Terms interface pops up and you should check the
checkbox before enabling it.
Step 3 (Optional) Check Custom and enter the Server
Address.
Step 4 (Optional) Check Enable Stream Encryption.
After this feature is enabled, the verification
code is required for remote access and live view.
You can use the scanning tool of your phone to quickly get
the code of the device by scanning the QR code.
Figure 3-11 PT Cloud Settings
Step 5 Click Apply to save the settings.
After configuration, you can access and manage the DVR by your mobile phone on which the PT
Cloud application is installed or by the website (www.PT Cloud.com).
Please refer to the help file on the official website and the PT Cloud Mobile Client User Manual for adding the
device to PT Cloud and more operation instructions.
To Next Page
Loading...
