LTS LTD8416T-ST - Adding IP Cameras; Network Settings

Digital Video Recorder Quick Start Guide
10
3.7 Adding IP Cameras
Purpose
Before you can get live video or record the video files, you should add the network cameras to the connection
list of the device.
Before you start
Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please
refer to the User Manual for activating the inactive IP camera.
Step 1 Go to Menu > Camera > IP Camera.
Step 2 Select the IP camera from the list and
click to add the camera (with the
same admin password of the DVR’s).
Step 3 (Optional) Check Enable H.265 (For
Initial Access) for the connected IP
camera supporting H.265. Then the IP
camera will be encoded with H.265.
Figure 3-7 Add IP Camera
3.8 Network Settings
3.8.1 Configuring General Settings
Purpose
Network settings must be properly configured before you operate DVR over network.
Step 1 Go to Menu > Configuration >
Network > General.
Step 2 Configure the general parameters of
network.
Step 3 Click Apply to save the settings.
Figure 3-8 Network Settings
3.8.2 Configuring PT Cloud
Purpose
PT Cloud provides the mobile phone application and the service platform page to access and manage your
connected DVR, which enables you to get a convenient remote access to the surveillance system.