Need help?Do you have a question about the LTS LTD8308K-ETC and is the answer not in the manual?
General| Working Humidity | 10% to 90% |
|---|---|
| Model | LTD8308K-ETC |
| Type | DVR |
| Channels | 8 |
| Video Input | 8 |
| HDTVI Input | 8 |
| AHD Input | 8 |
| Encoding Resolution | 1080P/720P/960H/D1 |
| HDMI Output | 1 |
| VGA Output | 1 |
| Audio Output | 1 |
| Hard Disk | 1 SATA |
| Network Interface | 1, RJ45 10M/100M self-adaptive Ethernet interface |
| Network | 1 RJ45 10M/100M/1000Mbps |
| USB Interface | 2 USB 2.0 |
| Operating System | Linux |
| Power Supply | 12 VDC |
| Consumption | ≤12 W |
| Operating Temperature | -10 °C to 55 °C (14 °F to 131 °F) |
| Working Temperature | -10°C to +55°C |
| Recording Resolution | 1080P/720P/960H/D1 |
| Capacity | Up to 10 TB capacity for each disk |
| Storage Capacity | Up to 10 TB capacity for each disk |
| Hard Drive Capacity | Up to 10 TB capacity for each disk |
| Video Compression | H.265 Pro+/H.265 Pro/H.265/H.264+/H.264 |
| Compression | H.265 Pro+/H.265 Pro/H.265/H.264+/H.264 |
Details the components and indicators on the front of the DVR.
Describes the various ports and connectors on the rear of the DVR.
Provides guidelines for installing the DVR unit itself, including mounting and environment.
Step-by-step instructions for installing a hard disk drive (HDD) into the DVR.
Explains how to connect PTZ controllers using the RS-485 interface.
Provides a chart estimating storage space usage based on bit rate for recording.
Illustrates the hierarchical organization of the DVR's menu system.
Outlines the correct procedures for powering the DVR on and off.
Guides through the initial device activation process, including setting an admin password.
Explains how to set and use a graphical unlock pattern for device login.
Details the process for logging into and out of the DVR system.
Describes how to use the setup wizard for initial device configuration.
Explains how to check the status of video signal inputs.
Covers the configuration of network parameters for DVR connectivity.
Provides instructions on how to add network cameras to the DVR.
Explains the live view interface and camera status icons.
Details how to configure recording schedules and modes for the DVR.
Guides on how to access and review recorded video footage.
Instructions for accessing and logging into the DVR via a web browser.
To Next Page