Digital Video Recorder Quick Start Guide
Menu > Shutdown
Figure 3‐17 Logout
Step 2 Click Logout.
After you have logged out the system, menu operation on the screen is invalid. It is
required to input a user name and password to unlock the system.
3.6 Using the Setup Wizard
The Setup Wizard can walk you through some important settings of the device. By
default, the Setup Wizard starts once the device has loaded.
Check the checkbox to enable Setup Wizard when device starts. Click Next to continue
the setup wizard. Follow the guide of the Setup Wizard to configure the system
resolution, system date/time, network settings, HDD management, record settings, etc.
Figure 3‐18 Wizard
3.7 Viewing Signal Input Status
5 MP long distance transmission is available for LTD85XXK‐ST series DVR.
Step 1 Enter the Signal Input Status interface.
Menu > Camera > Signal Input Status
23
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
To Next Page