Digital Video Recorder Quick Start Guide
Figure 3‐14 Reset Password
2) Input the new password and confirm the password.
3) Click OK to save the new password. Then the Attention box pops up as
shown below.
Figure 3‐15 GUID File Imported
4) Click OK and the Attention box as below pops up to remind you to
duplicate the password of the device to IP cameras that are connected with
default protocol. Click Yes to duplicate the password or No to cancel it.
Figure 3‐16 Duplicat e the Password
If you want to retrieve the password when you forget it, you must export the
GUID file first.
Once the password is reset, the GUID file becomes ineffective. You can export a
new GUID file.
3.5.2 User Logout
Purpose:
After log ging out, the monitor turns to the live view mode and if you want to perform
any operations, you need to enter user name and password log in again.
Step 1 Enter the Shutdown menu.
22
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
To Next Page