Digital Video Recorder Quick Start Guide
Figure 3‐21 Network Settings
Step 2 Select the General tab.
Step 3 In the General Settings interface, you can configure the following settings: NIC
Type, IPv4 Address, IPv4 Gateway, MTU and DNS Server.
If the DHCP server is available, you can check the checkbox of DHCP to
automatically obtain an IP address and other network settings from that server.
Step 4 After having configured the general settings, click the Apply button to save the
settings.
1 self‐adaptive 10M/100M/1000M network interface is provided for
LTD8316K‐ET and LTD85XXK‐ST series DVR.
1 self‐adaptive 10M/100M network interface is provided for LTD8304K‐ET,
LTD8308K‐ET/ETC series DVR.
If DHCP is enabled, you can check the checkbox of Enable DNS DHCP or uncheck
it and edit the Preferred DNS Server and Alternate DNS Server.
3.9 Adding IP Cameras
Purpose
Before you can get live video or record the video files, you should add the network
cameras to the connection list of the device.
Before you start
Ensure the network connection is valid and correct, and the IP camera to add has
already been activated. Please refer to the User Manual for activating the inactive IP
camer a.
You can select one of the following three options to add the IP camera.
OPTION 1:
25
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
To Next Page