Need help?Do you have a question about the LTS LTD8516K-ST and is the answer not in the manual?
General| Operating System | Embedded Linux |
|---|---|
| Network Interface | 1 RJ45 10M/100M/1000M self-adaptive Ethernet interface |
| Operating Temperature | -10 °C to +55 °C (14 °F to 131 °F) |
| Model | LTS LTD8516K-ST |
| Video Inputs | 16 channels |
| Hard Drive Support | 2 HDDs |
| Audio Input | 1-channel RCA |
| Audio Output | 1-channel RCA |
| Compression | H.264 |
| Compression Format | H.264 |
| USB Interface | 2x USB 2.0 |
Lists general features of the video recorder, including camera compatibility and encoding.
Explains how to use and pair the IR remote control with the device.
Explains how to connect and use a USB mouse with the device.
Describes the various ports and connectors on the rear panel of the device.
Guides on the proper procedure for starting up the device safely.
Explains the initial activation process, including setting an admin password.
Describes how to set a graphical unlock pattern for device login.
Covers methods for logging into the device using patterns or passwords.
Guides users through essential initial device configuration settings.
Provides instructions for safely shutting down the device.
Guides on connecting and adding IP cameras to the system.
Explains how to use privacy masks to conceal parts of the camera image.
Explains how to begin viewing live video feeds from cameras.
Details how to configure target detection for motion, face, vehicle, or body.
Guides users through basic PTZ camera operations like view, focus, and zoom.
Details how to set up PTZ parameters for camera control.
Explains how to set specific camera positions (presets) for events.
Guides on configuring patrol paths for PTZ cameras.
Details how to record and set custom PTZ movement patterns.
Covers managing storage devices like HDDs and network disks.
Explains the primary video stream affecting recording quality and image size.
Explains how to configure recording triggered by motion detection events.
Guides on setting up recording triggered by various event types.
Details recording triggered by alarm inputs.
Guides on enabling 1080p Lite mode for enhanced real-time resolution.
Explains how to create disk arrays using RAID technology for data redundancy.
Guides on enabling the RAID function for disk arrays.
Explains the process for manually creating disk arrays with specific RAID levels.
Guides on configuring hot spare disks for automatic array rebuilding.
Details the process for manually rebuilding degraded arrays.
Guides on searching and exporting all video and picture files.
Details searching for human-related video and picture files.
Covers actions triggered by alarms, including screen, audio, email, and PTZ.
Guides on configuring human body detection for identifying and capturing people.
Explains how to configure face detection for identifying human faces in surveillance scenes.
Details vehicle detection for traffic monitoring, including license plate capture.
Guides on setting up detection for objects crossing a virtual line.
Explains how to configure detection for objects entering or loitering in a virtual region.
Guides on configuring network parameters like IP address and subnet mask.
Guides on upgrading system firmware using a local storage device.
Covers disabling IP PORTAL, setting HTTP authentication, and RTSP authentication.
Details the process of adding new user accounts with specific permissions.
Explains how to assign permissions for local and remote operations to users.
Details how to modify the admin user's password and unlock pattern.
Explains how to set up security questions for password recovery.
Guides on setting a reserved email address for password reset.
Details resetting the admin password using the GUID file.
Guides on resetting the admin password by answering security questions.
Explains resetting the admin password using a reserved email address.
To Next Page
