LTS LTD8516K-ST - Configure 1080 P Lite; Enable the 1080 P Lite Mode

Network Video Recorder User Manual
82
Figure 7-13 Record Parameters
Step 6 Check the checkbox of Redundant Record/Capture.
Step 7 Click OK to save settings.
7.12 Configure 1080p Lite
Purpose
When the 1080P Lite Mode is enabled, the encoding resolution at 1080P Lite (real-time) is
supported. If not, up to 1080P (non-real-time) is supported.
This chapter is applicable to -E series DVR.
7.12.1 Enable the 1080P Lite Mode
Step 1 Go to Menu > Record > Advanced.