Network Video Recorder User Manual
40
Step 7 Click Next to enter the Change Password interface to create the new admin password
if required.
Figure 2-11 Change Password
You can enter click the to show the characters input.
1) Check the checkbox of New Admin Password.
2) Enter the original password in the text field of Admin Password
3) Input the same password in the text field of New Password and Confirm.
4) Check the Unlock Pattern to enable the unlock pattern login.
We highly recommend you create a strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
Step 8 Click OK to complete the startup Setup Wizard.
2.6 Enter Main Menu
After you have completed the wizard, you can right click on the screen to enter the main menu
bar. Refer to the following figure and table for the description of main menu and sub-menus.
Figure 2-12 Main Menu Bar
To Next Page
Loading...
