LTS LTD8516K-ST - Trigger or Clear Alarm Output Manually

Network Video Recorder User Manual
118
Figure 11-10 Exceptions Handling
Step 4 Set the normal linkage and alarm output triggering. Refer to 11.2 Configure Alarm
Linkage Actions.
11.8 Trigger or Clear Alarm Output Manually
Purpose:
Sensor alarm can be triggered or cleared manually. When Manually Clear is selected for the dwell
time of an alarm output, the alarm can be cleared only by clicking Clear.
Step 1 Go to System> Event>Normal Event>Alarm Output.
Step 2 Select the alarm output you want to trigger or clear and click .
Step 3 Click Trigger/Clear to trigger or clear an alarm output.