LTS LTD8516K-ST - System Service; Network Security Settings

Network Video Recorder User Manual
171
16.8 System Service
16.8.1 Network Security Settings
Disable IP PORTAL Services
Purpose
You can disable IP PORTAL service to enhance the access security, e.g., when you are in the
untrusted network environment.
Step 1 Go to System > System Service > System Service.
Step 2 Uncheck Enable IP PORTAL to disable the service.
HTTP
You can choose to disable the HTTP, or set the HTTP authentication when it is enabled as demand
to enhance the access security.
By default, the HTTP service is enabled.
Set HTTP Authentication
Purpose
If you need to enable the HTTP service, you can set the HTTP authentication to enhance the access
security.
Step 1 Go to System > System Service > System Service.
Figure 16-12 HTTP Authentication
Step 2 Check the Enable HTTP to enable the HTTP service.
Step 3 Select the digest as the HTTP Authentication in the drop-down list.
Step 4 Click Save to save the settings.