Network Video Recorder User Manual
60
Step 2 Use the directional buttons on the PTZ control panel to wheel the camera to the
location where you want to set preset, and the zoom and focus operations can be recorded in
the preset as well.
Step 3 Click in the lower right corner of live view to set the preset.
Figure 6-3 Set Preset
Step 4 Select the preset No. (1~255) from the drop-down list.
Step 5 Enter the preset name in the text field.
Step 6 Click Apply to save the preset.
Step 7 Repeat steps 2-6 to save more presets.
Step 8 (Optional) Click Cancel to cancel the location information of the preset.
Step 9 (Optional) Click in the lower right corner of live view to view the configured
presets.
Figure 6-4 View the Configured Presets
6.3.2 Call a Preset
Purpose:
This feature enables the camera to point to a specified position such as a window when an event
takes place.
Step 1 Click on the quick settings toolbar in the live view interface..
Step 2 Click in the lower right corner of live view.
Step 3 Select the preset No. from the drop-down list.
Step 4 Click Call to call it.
Figure 6-5 Call Preset (1)
Or click in the lower right corner of live view, and click the configured preset to call it.
To Next Page
Loading...
