Network Video Recorder User Manual
30
Connector for RS-232 devices.
1.3.5 LTD84XXK-ST
Figure 1-9 Rear Panel of LTD84XXK-ST
Table 1-7 Rear Panel Description
BNC interface for Turbo HD and analog video input.
BNC connector for video output.
Universal Serial Bus (USB) port for additional devices.
Simultaneous HDMI1/VGA output. Display local video output and
menu.
HDMI2 video output connector.
RS-485 and Alarm
Interface
Connector for RS-485 devices. T+ and T- pins connect to R+ and R- pins
of PTZ receiver respectively.
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices,
the first DVR’s D+, D- pin should be connected with the D+, D- pin of
the next DVR.
Connector for alarm input.
Connector for alarm output.