Network Video Recorder User Manual
117
11.7 Configure Exceptions Alarm
Purpose:
The exception events can be configured to take the event hint in the live view window, trigger
alarm output and linkage actions.
Step 1 Go to System > Event > Normal Event > Exception.
Step 2 (Optional) Enable the event hint if you want to display the event hint in the live view
window.
1) Check Enable Event Hint.
2) Click to select the exception type (s) to take the event hint.
Figure 11-9 Event Hint Settings
Step 3 Select the exception type from the drop-down list to set the linkage actions.
To Next Page
Loading...
