Network Video Recorder User Manual
153
PT Cloud is disabled by default.
The verification code is empty by default. It must contain 6 to 12 letters or numbers, and it
is case sensitive.
Step 3 (Optional) Check Custom to enter the server address as your desire.
Step 4 (Optional) Check Enable Stream Encryption, verification code is required for remote
access and live view.
Step 5 (Optional) Click Unbind if the device requires to unbind with the current PT Cloud
account.
Step 6 Click Apply.
What to do next:
After configuration, you can access and manage your devices through LTS-connet app or
website.
15.3 Configure DDNS
Purpose
You can set Dynamic DNS service for network access. Different DDNS modes are available: DynDNS,
PeanutHull, and NO-IP.
Before You Start
You must register DynDNS, PeanutHull and NO-IP services with your ISP before configuring DDNS
settings.
Step 1 Go to System > Network > TCP/IP > DDNS.
Step 2 Check Enable.
Step 3 Select DynDNS under DDNS Type.
PeanutHull and NO-IP are also available under DDNS Type, and required information should be
entered accordingly.
Step 4 Enter Server Address for DynDNS (i.e. members.dyndns.org).
Step 5 Under Device Domain Name, enter the domain name obtained from the DynDNS
website.
Step 6 Enter the User Name and Password registered in the DynDNS website.
To Next Page
Loading...
