Network Video Recorder User Manual
50
The configured privacy mask zones on the window can be cleared by clicking the corresponding
Clear Zone1-4 icons on the right side of the window, or click Clear All to clear all zones.
Step 6 Click Apply to save the settings.
4.3 Configure the Video Parameters
Purpose:
You can customize the image parameters including the brightness, contrast, saturation for the live
view and recording effect.
Step 1 Click on the main menu bar.
Step 2 Click Display.
Step 3 Select the camera from the drop-down list.
Step 4 Adjust the slider or click on the up/down arrow to set the value of the brightness,
contrast or saturation.
Step 5 Click Apply to save the settings.
4.4 Configure the Day/Night Switch
Purpose:
The camera can be set to day, night or auto switch mode according to the surrounding
illumination conditions.
Step 1 Click on the main menu bar.
Step 2 Click Display.
Step 3 Select the camera from the drop-down list.
Step 4 Select Day/Night Switch to Day, Night, Auto or Auto-Switch.
Auto: The camera switches between the day mode and the night mode according to the
illumination automatically.
The sensitivity ranges from 0 to 7, and the higher sensitivity results in the more easily to
trigger the mode switch.
The switch time refers to the interval time between the day/night switch. You can set it from
5 sec to 120 sec.
Auto-Switch: The camera switches the day mode and the night mode according to the start
time and end time you set.
To Next Page
Loading...
