LTS LTD8516K-ST - Configure Continuous Recording; Configure Motion Detection Recording

Network Video Recorder User Manual
76
Make sure you have installed the HDDs to the device or added the network disks before you
storing the video files, pictures and log files.
Refer to the Quick Start Guide for the HDD installation.
Refer to Chapter 7.1.2 Add the Network Disk for network HDD connections.
Step 1 Go to Storage > Recording Schedule.
Figure 7-9 Recording Schedule
Step 2 Select a camera.
Step 3 Check Enable Schedule.
Step 4 Select a record type. The record type can be Continuous, Motion Detection, Alarm,
Motion | Alarm, Motion & Alarm, and Event.
Different recording types are configurable.
Continuous: scheduled recording.
Event: recording triggered by all event triggered alarm.
Motion: recording triggered by motion detection.
Alarm: recording triggered by alarm.
M/A: recording triggered by either motion detection or alarm.