Luca Varess SENSES User Manual

Disclaimer
If you install the product in a way that differs from this manual, this will void all guarantees. Before installation check that the product meets all your
requirements and is not damaged. By proceeding with installation, you accept the condition of the product.
Disclaimer
Indien u het product plaatst op een manier die afwijkt van deze handleiding, vervalt alle garantie. Controleer voor plaatsing of het product aan al uw eisen
voldoet en niet beschadigd is. Indien u overgaat tot plaatsing, aanvaardt u de staat waarin het product zich bevindt.
Clause de non-responsabilité
Si vous installez le produit d’une manière différente de celle présentée dans ce manuel, toutes les garanties seront invalidées. Contrôlez avant le placement si
le produit répond à toutes vos exigences et n’est pas endommagé. En procédant au placement, vous acceptez l’état dans lequel se trouve le produit.
Haftungsausschluss
Wenn Sie das Produkt nicht genau nach den Angaben in dieser Montageanleitung einbauen, verfällt die Garantie. Überprüfen Sie vor dem Einbau des Pro-
dukts, ob sämtliche Voraussetzungen erfüllt sind und das Produkt nicht beschädigt ist. Sobald Sie mit der Montage beginnen, sehen Sie, in welchem Zustand
sich das Produkt bendet.
Installationguide
Installatiegids
Guide d’installation
Montageanleitung
SENSES sliding showerdoor
63160_INSTALL_INT_ver2020.1.2
TOOLS NEEDED
Safety
SANITAIR

Luca Varess SENSES Specifications

General

Brand	Luca Varess
Material	Ceramic
Color	White
Flushing System	Dual Flush
Style	Modern
Warranty	2 years
Water Consumption	3/6 L
Features	Soft Close Seat

Summary

Safety Precautions

Tools Required for Installation

Parts List and Identification

Shower Door Installation Steps

Step 1: Wall Mounting Preparation

Prepare wall mounting area, ensuring correct alignment and use of level for initial fixing points.

Step 2: Attaching Vertical Profiles

Secure vertical profiles to the wall, ensuring they are plumb and correctly spaced.

Step 3: Installing Top and Bottom Tracks

Fix the top and bottom tracks to the wall and floor, aligning them with the vertical profiles.

Step 4: Mounting Fixed Glass Panel

Install the fixed glass panel into the designated profiles, ensuring a secure fit.

Step 5: Fitting Decorative Side Orientation

Ensure decorative glass sides face outwards from the shower enclosure.

Step 6: Attaching Sliding Mechanism

Affix the sliding door mechanism components to the top track and door.

Step 7: Installing Sliding Door Rollers

Attach rollers to the sliding door panels and prepare for insertion into tracks.

Step 8: Inserting Sliding Door

Carefully insert the sliding door into the top and bottom tracks.

Step 9: Securing Sliding Door Rollers

Secure the sliding door rollers in the top track, ensuring smooth movement.

Step 10: Attaching Door Handles

Mount the door handles onto the sliding door panels.

Step 11: Adjusting Door Alignment

Adjust the sliding door for proper vertical and horizontal alignment using adjustment screws.

Step 12: Securing Door Stops

Install and secure door stops to prevent excessive movement or impact.

Step 13: Sealing and Final Check

Apply sealant to edges and perform final checks for stability and water tightness.