Using Features
EXT
0 0
#
0 0#
782
Features that dial numbers automatically may need special
characters to allow for correct dialing or system response.
Inserts 1 5 second pause in the dial sequence.
Consecutive pauses are allowed. P appears on the display.
Sends switchhook flash. Must be first entry in
sequence. F appears on the display.
Used to signal end of dialing sequence for Auto Dial
buttons or to separate grouped digits. The ## appears
on the display.
Stop
. Halts dialing sequence to allow for system
response. (Requires manual restart.)
Special
Characters
Headsets for 4400-Series telephones allow one-touch operation,
hands-free. The headset plugs into the headset jack. Two
buttons are used for headset operation:
Headset Status. Press to switch between
headset and handset operation.
To program: + lift handset + + +
+ .
Headset Hangup. Press to disconnect a call.
The Headset/Hangup button is programmed by your System
Manager.
Headsets
Conf
Trnsfr
Headset Status
Headset /Hangup
Headset Status
Hold
# #
To Next Page
Loading...
