The Feature Directory provides a convenient quick reference list for 12 features. Most likely, the Feature Directory on your voice terminal
has been completed by your system manager. You are not limited to the 12 features shown on your Feature Directory. All other features
available can be accessed by dialing a feature access code supplied by your system manager.
To access a feature from your Feature Directory, press the Feature button then dial the entry number assigned to the feature or number
you wish to access (0 to 9 and , ).
There are two 6402 voice terminals: the basic voice terminal and the 6402D which has a 2-line, 16-character display.
The primary uses for the display are:
• Viewing the time and date when the terminal is idle.
• Using the timer (if the Timer feature is one of the entries in your Feature Directory) to keep track of time spent on a call or task.
• Viewing call-related information when placing or answering calls.
Speaker button: to access the Group listen-
ing feature.The light next to the button goes on
when the feature is active.
Feature button: to access the 12 features
listed on the Feature Directory. The light next
to the button goes on when the feature is
active.
Hold button: to put a call on hold until you can
return to it. The light next to the button goes on
when the feature is active.
Redial button: to automatically redial the last
number you dialed (outside, extension, trunk
number or feature access code).
Transfer button:
• while off-hook, to transfer a call to another
voice terminal.
Conference button:
• while off-hook, to set up a conference call
of up to 6 people including yourself.
• while on-hook, to test your voice terminal
lights and display.
• while on-hook, to select a ringing pattern for
your voice terminal. Press the button repeat-
edly to cycle through the different patterns.
After 7 seconds of no activity, the current ring
pattern is saved.
Volume control button: to adjust the volume
of the speaker, handset receiver level and
ringer.
Message light: goes on when a message has
been left for you. See your system manager
for instructions on how to consult your mes-
sages.
To Next Page
Loading...
