Lucent Technologies SLC 5 Series - Page 147

363-205-401 Power Up:
Issue 7, March 1997 Page 1 of 4
DLP-514
Add 337A Battery Chargers to an Existing
Frame-Type or 80-Type Cabinet RT Battery Shelf
1. Get one
337A BATTERY CHARGER
(Figure 1 ) and inspect it for possible
damage.
2. Verify that fuses on
BATTERY CHARGER
are not blown (Figure 1).
3. Insert the
337A BATTERY CHARGER
into the slot located on the left side of
the battery shelf (Figure 2) and press the
HIGH RATE CHG
/
ACTIVATE
button
on the
BATTERY CHARGER
.
Response:
BAT DISCHG
indicator on
337A BATTERY CHARGER
is
lighted.
4. Are other
BATTERY CHARGER
s to be installed?
If
YES,
then proceed to Step
1.
If
NO,
then
STOP. YOU HAVE COMPLETED THIS PROCEDURE.