Lucent Technologies SLC 5 Series - Page 260

363-205-401 RT Turn Up: NTP-004
Issue 7, March 1997 Page 3 of 4
DO ITEMS BELOW IN ORDER LISTED FOR DETAILS, GO TO
5.
!
CAUTION:
Removing the ADU or BCU in an FPB Mode 1 system will
interrupt service on digroup A.
Install equipped and pre-service options in
ADU
for digroups C
and D:
DLP-505A.
AUB21 ADU
(FPA using MC97723A1 or MC97756A1
BCU.)
DLP-505B.
AUB24 ADU
(FPB Mode 1 using MC97724A1,
MC97771A1, or MC97776A1 BCU. FPB Mode 2 with
MC97771A1 or MC97776A1 BCU. No special service.)
DLP-506C.
AUB27 ADU
[FPB Mode 1 or Mode 2 with special service,
and FPC-AutoCut using MC97771A1 or MC97776A1 BCU.
FPF (ADU optioned for FPC) using MC97779A1 BCU.]
DLP-507D.
AUB26 ADU
(FPC or FPD using MC97756A1 BCU.)
DLP-5096. Install and test
PCU
in CD shelf.
DLP-5107. Install
TRU
(transmit/receive unit) in CD shelf.
DLP-5118. For FPD only, install
TCU
(transcoder unit) in
LIU-D
slot in facility
shelf.
9.
NOTE:
All
LIU
s in the same system should have identical option
switch settings.
DLP-512Install DS1
LIU
(line interface unit) in
LIU-C
slot in facility shelf
after making option, equalizer, and transmit pad settings.