Conversions: NTP-006 363-205-401
Page 2 of 2 Issue 7, March 1997
DO ITEMS BELOW IN ORDER LISTED FOR DETAILS, GO TO
6. Establish communication with central office personnel.
7. Move any special service channel units (including coin) to last four
channel unit slots in each digroup.
8.
!
CAUTION:
The following Steps will cause service interruption while the
system is being converted to Mode 2.
When requested by central office personnel, remove LIUs
installed in LIU slots B and D.
9. When requested by central office personnel, set ADU options for
Mode 2 application:
DLP-506A. On
AUB27
(with special service capability).
DLP-508B. On
AUB24
(no special services).
DLP-51010. Perform end-to-end Mode 1 to Mode 2 conversion test.
11. Update office records.
To Next Page
Loading...