Lucid ADA8824 - Table of Contents; Section 1 Introduction

TABLE OF CONTENTS
Section 1 Introduction 1
Section 2 Operator Safety Summary 2
Section 3 About the ADA8824 (ADAT) 4
Section 4 Setup (Connections & Settings) 5
Section 5 Product Description
Front Panel Overview 10
Rear Panel Overview 11
Section 6 Using the ADA8824 14
Section 7 Applications & Configurations
Digital Audio Workstation 18
Multitrack Recording 19
A/D-D/A Converter with ADAT Optical I/O 19
A/D-D/A Converter, No ADAT Optical I/O 20
Digital I/O to ADAT Optical I/O 21
Syncing Two Units 22
Section 8 MIDI Implementation Chart 24
Section 9 Block Diagram 25
Section 10 ADA8824 (ADAT) Specifications 26
Section 11 Warranty & Service 28
Section 12 Declaration of Conformity 29
Rev A.0, June 1, 1999
Lucid part number 53ADAT1A00
Specifications subject to change without notice.
©1999 Lucid.. All rights reserved.
Lucid is a registered trademark of Symetrix, Inc.
Mention of third-party products is for informational purposes
only and constitutes neither an endorsement nor a recommenda-
tion. Lucid assumes no responsibility with regard to
the performance or use of these products.
Under copyright laws, no part of this manual may be reproduced or
transmitted in any form or by any means, electronic or mechanical,
including photocopying, scanning, recording or by any information
storage and retrieval system, without permission, in writing, from
Lucid.
Lucid
6408 216th St. SW
Mountlake Terrace, WA 98043 USA
Tel: 425.778.7728
Fax: 425.778.7727
Email: lucid@lucidaudio.com
Website: www.lucidaudio.com