Model 12-4 Technical Manual Section 9
Ludlum Measurements, Inc. Page 9-1 May 2016
Recycling
udlum Measurements, Inc. supports the recycling of the electronic
products it produces for the purpose of protecting the environment
and to comply with all regional, national, and international agencies
that promote economically and environmentally sustainable
recycling systems. To this end, Ludlum Measurements, Inc. strives to supply
the consumer of its goods with information regarding reuse and recycling of
the many different types of materials used in its products. With many
different agencies – public and private – involved in this pursuit, it becomes
evident that a myriad of methods can be used in the process of recycling.
Therefore, Ludlum Measurements, Inc. does not suggest one particular
method over another, but simply desires to inform its consumers of the
range of recyclable materials present in its products, so that the user will
have flexibility in following all local and federal laws.
The following types of recyclable materials are present in Ludlum
Measurements, Inc. electronics products, and should be recycled separately.
The list is not all-inclusive, nor does it suggest that all materials are present in
each piece of equipment:
Batteries Glass Aluminum and Stainless Steel
Circuit Boards Plastics Liquid Crystal Display (LCD)
Ludlum Measurements, Inc. products, placed on the market after August 13,
2005, have been labeled with a symbol recognized internationally as the
“crossed-out wheelie bin,” which notifies the consumer that the product is
not to be mixed with unsorted municipal waste when discarding. Each
material must be separated. The symbol will be placed near the AC
receptacle, except for portable equipment where it will be placed on the
battery lid.
The symbol appears as such:
Sectio
9
L
To Next Page
Loading...
Need help?
General
