Need help?Do you have a question about the Lufft WS200-UMB and is the answer not in the manual?
General| Precipitation Measurement | Yes |
|---|---|
| Measurement accuracy wind direction | ±3 ° |
| Resolution wind direction | 1 ° |
| Resolution wind speed | 0.1 m/s |
| Measurement Parameters | Temperature, Humidity, Pressure, Wind Speed, Wind Direction, Precipitation |
| Temperature Range | -40°C to +60°C |
| Humidity Range | 0 to 100 % |
| Pressure Range | 300 hPa to 1200 hPa |
| Wind Direction Range | 0 to 360 ° |
| Measurement accuracy wind speed | ±0.3 m/s |
| Interfaces | RS-485, SDI-12 |
| Operating temperature range | -40°C to +60°C |
Explains symbols for hazards and operational information.
Details essential safety measures for installation and operation.
Defines the intended purpose and operational limits of the equipment.
Outlines potential consequences of improper installation or operation.
Specifies the warranty period and conditions for forfeiture.
Acknowledges trademarks of third-party products.
Lists optional accessories available for purchase.
Details available spare parts for maintenance or replacement.
Points to resources for further information and tools.
Describes the sensors and method for measuring air temperature and humidity.
Explains the sensor technology and calculation for air pressure measurement.
Details the radar technology used for precipitation measurement.
Defines wet bulb temperature and its relevance to the device.
Explains specific enthalpy as a state parameter of humid air.
Describes how air density is calculated from atmospheric conditions.
Explains the ultrasound sensor technology used for wind measurement.
Details the integrated compass function for wind direction alignment.
Describes the heating function for sensors in winter conditions.
Explains the pyranometer used for measuring global radiation.
Describes the retrieval of the latest measurement value.
Explains the calculation and retrieval of min/max measurement values.
Details the calculation and retrieval of average measurement values.
Describes the calculation of vectorial averages for wind data.
Lists UMB channels and ranges for air and dewpoint temperature.
Specifies UMB channels and ranges for wind chill temperature.
Lists UMB channels and ranges for relative and absolute humidity.
Details UMB channels and ranges for absolute and relative air pressure.
Lists UMB channels and ranges for wet bulb temperature.
Specifies UMB channels and ranges for specific enthalpy.
Details UMB channels and ranges for air density.
Lists UMB channels and ranges for various wind speed measurements.
Details UMB channels and ranges for wind direction measurements.
Specifies UMB channel and range for wind measurement quality.
Lists UMB channel and range for compass heading.
Details UMB channels and ranges for absolute precipitation quantity.
Lists UMB channels and ranges for differential precipitation quantity.
Specifies UMB channels and ranges for precipitation intensity.
Details UMB channel and coding for precipitation type.
Lists UMB channels and ranges for heating temperatures.
Specifies UMB channels and ranges for global radiation.
Describes how to securely mount the sensor bracket onto a mast.
Explains the procedure for aligning the sensor to magnetic North.
Specifies the required DC supply voltage and approval requirements.
Describes the RS485 interface for communication and configuration.
Illustrates the connection procedure to the ISOCON-UMB module.
Advises on the proper use and connection of surge protection devices.
Lists the default configuration parameters of the weather station.
Describes how to use the UMB-Config-Tool for device setup.
Explains basic configuration options like Device ID and protocol settings.
Details settings for temperature, humidity sensors, and fan operation.
Details settings related to precipitation measurement and calibration.
Explains options for reducing power consumption.
Lists the operational ranges and accuracy for each measurement parameter.
Includes dimensional drawings of the weather station models.
Specifies disposal procedures according to EU directives.
Recommends following local regulations for disposal.
Provides contact information for technical assistance and FAQs.
Summarizes UMB channel assignments for data requests.
Lists channel assignments for TLS format data processing.
Details the structure and commands for binary data communication.
Explains text-based communication for data requests using ASCII.
Describes simple text-based communication for basic measurement requests.
Covers communication using the SDI-12 serial interface standard.
Details the Modbus protocol for integration with PLC environments.
To Next Page
