Need help?Do you have a question about the Lufft WS500-UMB and is the answer not in the manual?
General| Parameter Measured | Temperature, Humidity, Air Pressure, Wind Speed, Wind Direction, Precipitation |
|---|---|
| Air Pressure Accuracy | ±0.5 hPa |
| Wind Speed Accuracy | ± 0.3 m/s or ± 3 % (whichever is greater) |
| Wind Direction Accuracy | ±3° |
| Precipitation Accuracy | ±5% |
| Precipitation Type (yes/no) | yes |
| Precipitation Intensity (yes/no) | yes |
| Precipitation Quantity (yes/no) | yes |
| Protection Class | IP66 |
| Measurement Technology | Ultrasonic, Capacitive |
| Temperature Range | -50°C to +60°C |
| Temperature Accuracy | ±0.2°C |
| Humidity Range | 0 to 100% RH |
| Humidity Accuracy | ±2% RH |
| Air Pressure Range | 300 hPa to 1200 hPa |
| Wind Speed Range | 0 to 60 m/s |
| Wind Direction Range | 0 to 360° |
| Precipitation Type | Rain, Snow |
| Communication Interface | RS485, SDI-12 |
| Operating Temperature | -50...+60 °C |
| Weight | 1.5 kg |
Lists essential safety measures for installation and operation.
Defines intended operation conditions and purposes for the equipment.
Details consequences of improper installation or connection.
Step-by-step guide on how to physically mount the sensor on a mast.
Procedure for aligning the sensor to magnetic North for accurate wind direction.
Guidelines for choosing an optimal location for sensor installation.
Specifies voltage requirements and limitations.
Introduction to using the configuration software.
Configuring device ID, description, linespeed, protocol, and timeout.
Settings for pressure, wind, and compass calibration.
Performing functional tests using the configuration tool.
Lists measurement ranges and accuracy for each sensor.
Details the structure and principles of binary communication.
Details text-based communication using ASCII protocol.
Details communication using the SDI-12 standard.
Details Modbus communication protocol for PLC integration.
To Next Page
