Lumag MD500E - Page 5

Distribution Limited
Lumag Servicing and
Maintenance Schedules
Engine Service & Maintenance Schedule
Machine Service & Maintenance Schedule
Item Checks/Work Each Use 20hrs
(1st Month)
50hrs
(2nd Month)
100hrs
(6th Month)
300hrs
(Yearly)
Engine Oil Check Level X
Change X (1) X
Air Filter Check X
Clean X (3)
Replace X (4)
Sediment Cup Clean X
Spark Plug Check/Clean X
Replace X
Idle Speed Check/Adjust X (2)
Valve Clearance Check/Adjust X (2)
Fuel Tank Strainer Check/Clean X (2)
Combuster Chamber Inspect/Clean X (2)
Fuel Lines Check X (2)
Item Checks/Work Each Use Weekly 20hrs
(1st Month)
50hrs
(2nd Month)
100hrs
(6th Month)
300hrs
(Yearly)
Hydraulic Oil Check Level X
Change X (1) X
Hydraulic Filter Change X (1) X
Transmission Oil Check Level X
Change X (1) X
Fasteners Tension Check Check X
Track Tension Check/Adjust X
Clean Machine Check X
Clutch Adjustment Check/Adjust X
Drive Belt Check/Adjust X
Replace X (2)
Grease Points Grease X
Parking Brake Check/Adjust X
Remove & Inspect X (2)
All Other Moving Parts &
Cables
Lubricate X
Tyres Inspect X
Clutch & Steering Handles Check Funcon X
Gearbox 2000ml Lumag Trans 1
1 – First service only, 2 = Should be carried out by your Lumag Dealer, 3 = May need to be done more oen in dusty areas &
4 = Replace paper element only
To maximise the life of your Lumag machine it needs to be serviced and maintained at every indicated month or operang
hour interval, whichever comes rst, in accordance with the below Schedules. Please note that failure to service your
machine on schedule or use genuine Lumag parts and consumables will result in your warranty being void.