M310-HT Manual Communications Port • 16
5.1.1 Serial Communications Settings
The communication settings are preset in our factory for 9600, E,7,1 and Address = 1.
You may download our Blackbody Communications program from this location:
http://files.mikroninfrared.com/Blackbody/BlackbodyCommsSoftware-ver3.zip
Connect your USB to RS232 converter to an open USB port on your PC. Your Eurotherm
controller is set to EiBisync, 9600 Baud. The software manual is included with the download.
Blackbody Serial Communication Software
To Next Page
Loading...