13
● Body
Cleaning
○ Keep the staking tool body clear of sap and other build-up
○ Always remove the blades before cleaning
○ Clean the tool with a solvent (such as mineral spirits).
● Blades
Care
○ Always wipe blades with a thin film of oil at the end of the day
to help prevent oxidation.
Cleaning
○ Clean the blades with a solvent (such as mineral spirits) and
immediately apply a thin film of oil to prevent oxidation.
Sharpening
○ Use a sharpening stone, file or the Blade Boss (BB2575) to re-
sharpen the blades, then clean the blades and apply a thin film
of oil.
● Shank
Replacement
○ If your shank breaks, we offer replacement shanks (see first
page for contact information)
○ Turn the shank counter-clockwise to remove
○
Turn the shank clockwise to install.
WARNING: ALWAYS HANDLE THE BLADES WITH EXTREME
CARE! FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY!
TASK EACH USE
Clean blade pockets X
Clean cutter bore X
Clean blades X
Inspect blades X
Oil blades X
MAINTENANCE
Visit our website or call
for more information
about our Blade Boss.
To Next Page
Loading...