Be aware that the machine should always
have the on/off switch (5) set to the off
position and be unplugged from any outlet
before any inspection, adjustments,
maintenance or cleaning is performed.
– Before each use inspect the general
condition of the machine. Check for loose
screws, misalignment or binding of moving
parts, cracked or broken parts, damaged
electrical wiring, loose router bit, and any
other condition that may affect its safe
operation. If abnormal noise or vibration
occurs, have the problem corrected before
further use.
– Each day remove all sawdust and debris
from the router table with a soft brush, cloth
or vacuum, making sure that you pay particular
attention to the extraction hood (1) and the
main table. Also lubricate all moving parts with
premium lightweight machine oil.
Do not use solvents or caustic agents
to clean the router table.
To Next Page
Loading...