Lumberjack ST2000 - Blade Shim Usage; Shim Installation Guide

5
Would you like to cut smoother
stakes?
● Place a shim underneath a
TB2500 blade and secure
both with screws as shown
● The shim should NOT
extend into cutting area or
cover the sharp edge of the
blade
● If installed properly the right
edge of the shim will be
flush with the right edge of
the blade (the non-cutting
edge)
Blade
●
Screw
●
Shim
●
Installing Shims
Included with your tool are the TB2500 Blade Shims.
● Smoother stake
● Reduced drill torque
● Less aggressive blade bite
● Increased time to cut
Pros of using shims
Cons of using shims