EasyManua.ls Logo

LumenRadio MoonLite - Technical Details and Compliance; Operating Specifications; CRMX Toolbox App; Regulatory Compliance

LumenRadio MoonLite
4 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Release 1.0 June 2019
SPECIFICATIONS
Power protection: Overvoltage and ESD protected power input
Operation temp. range: -20°C to +40°C (-4°F to 122°F) (ambient)
Environmental: For indoor use only
Frequency range: 2.402 to 2.480 GHz
Output power levels: 100mW (20dBm), 35mW (15dBm), 10mW (10dBm)
Low voltage operation: This product can also be powered by a supply rated 5V, minimum 500mA
MoonLite™, CRMX™, CRMX Nova™, CRMX Outdoor™, CRMX Slim™, CRMX OEM™, CRMX SuperNova™ are trademarks of LumenRadio AB.
W-DMX™ is a trademark of Wireless Solution Sweden AB. CRMX is patented by LumenRadio, CE, FCC.
US Patent 7,432,803
EU Declaration of Conformity
These products comply with the RED (Radio Equipment
Directive) of the European Union (2014/53/EC). This
equipment meets the following conformance standards:
ETSI EN 301 489-1 V2.1.1; ETSI EN 301 489-3 V2.1.1;
ETSI EN 300 328 V2.1.1; EN 60950
FCC statement
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
CRMX Toolbox app
Scan the QR code to download the CRMX Toolbox app.
For any questions, please contact
help@lumenradio.com or visit
https://support.lumenradio.com
+46 31 301 03 70 | sales@lumenradio.com | www.lumenradio.com
FCC ID: XRSTIMOMWAN201
IC: 8879A-TIMOMWAN201
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Related product manuals