LumenRadio MoonLite User Manual

MoonLite
INTRODUCTION
Thank you for buying a LumenRadio CRMX MoonLite product. This guide is intended to give you a quick
start to experience the benets of LumenRadio’s CRMX system.
The CRMX product you just purchased are designed to give you the highest reliability on the market
and are fully compatible with other CRMX products in entertainment lighting (CRMX Nova,
CRMX Outdoor, CRMX Slim, CRMX OEM). Through this you are able to expand
your wireless system with units from our other product lines as well as
with those of our partners. For the latest updates please visit
the LumenRadio website www.lumenradio.com.
The information furnished in this start guide is for informational use only and is subject to change without notice. Please
check www.lumenradio.com for latest version. LumenRadio AB assumes no responsibility or liability for any errors or
inaccuracies that may appear in this start guide.
All information and graphics are property of LumenRadio AB, Svangatan 2B, SE-416 68 Gothenburg, Sweden.
lumenradio
Creating Connectivity for a Better Tomorrow
Right green >80%
Mid green >60%
Left green >40%
Amber >20%
Red <20%
Link button - press
to link with, or unlink
from, another unit.
LED indicators - Mode, Status, Data
(See specications below)
We hope that you will enjoy
our products and that they
will bring benets and positive
experiences.
Mode (M)
BLE on (TX mode)
BLE on (RX mode)
RX mode
TX mode
RX mode
TX mode
Linked and synced
Transmitting
Linking or linked but not synced
Linking
color of ST = universe color selected by user
(green by default)
Not linked
DMX present
RDM, no DMX
RDM, with DMX
No DMX
when D = green, level bar displays battery level
when D = amber, level bar displays signal quality
Level indicators
- Signal quality and battery level
(See specications below)
CRMX MOONLITE CONTROL PANEL
See the operation section for details on how to link and unlink CRMX MoonLite units.
Indicators turn off after 30 sec inactivity when running on battery, press the button to wake up.
Status (ST) Data (D)
Level indicators

LumenRadio MoonLite Specifications

Operating Environment

operation temperature range	-20°C to +40°C (-4°F to 122°F)
environmental use	indoor use only

Frequency and Power

frequency range	2.402 to 2.480 GHz
output power levels	100mW (20dBm), 35mW (15dBm), 10mW (10dBm)
low voltage operation	5V, minimum 500mA

Summary

CRMX Moonlite Control Panel

LED Indicators Overview

Details on Mode, Status, and Data indicators for the CRMX MoonLite.

Link Button Functionality

Used to link with or unlink from another CRMX unit.

Level Indicators Explanation

Shows signal quality and battery level status.

Operating the MoonLite

Power On and Off

Procedure for powering the device on and off by holding the link button.

Linking CRMX Units

Steps to link MoonLite with other CRMX units or legacy W-DMX transmitters.

Unlinking CRMX Units

Procedures for unlinking individual receivers or all receivers from a transmitter.

Manual Flex Mode Change

Steps to manually switch between transmitter (TX) and receiver (RX) modes.

Advanced Features and Maintenance

Product Specifications Summary

Details on Bluetooth connectivity, battery life, and charging time.

Universe Color Pairing

Using the CRMX Toolbox app to assign colors for universe tracking.

Charging the MoonLite

Instructions for charging the device via USB Micro-B port.

Technical Details and Compliance

Operating Specifications

Details on power protection, temperature range, and frequency.

CRMX Toolbox App

Information on downloading and using the CRMX Toolbox application.

Regulatory Compliance

FCC statement and EU Declaration of Conformity information.