Lumens CaptureVision LC200

15
5.2.3 Video Source
5.2.3.1 Network Device Management
No
Item
Function Descriptions
1
Network Camera
1 Click [Refresh] and automatically scan the network cameras in the
same LAN
2 Click [Login Verification] and enter login information to connect the
camera
3 Once the status display “OK”, indicating that the image can be set
under the signal source input selection.
2
Network Streaming
1 Click [Add]
2 Enter the network streaming name and URL, and then click [Apply]
3 The newly added network streaming name will be displayed in the
list
Lumens Network
Camera
 Account: admin
 Password: 9999
1
2