Lumens VC-B30U

Other manuals for Lumens VC-B30U

Questions and Answers:

S
Shawna LittleAug 15, 2025
What to do if Lumens Security Camera cannot be operated by remote control?
- J
  James MurphyAug 15, 2025
  If the Lumens Security Camera cannot be operated by remote control, first ensure that the camera is connected to the computer and that video software is running. Also, prevent the camera from direct sunlight. Keep the camera away from energy-saving bulbs and IR touch screens to avoid interference. If multiple cameras are in the same area, operating two remote controls simultaneously may cause signal interference. Try using only one remote control.
J
Jessica RhodesAug 18, 2025
Why is there no image output from my Lumens Security Camera?
- J
  Jared DavidsonAug 18, 2025
  If your Lumens Security Camera has no image output, first check the power. Ensure that your display supports the output resolution, such as 1080p60, 1080i60, or 720p60. Also, replace the cables to make sure they are not faulty.
A
anna14Aug 22, 2025
What to do if Lumens Security Camera video screen flickers or freezes when connected to a MAC computer?
- J
  Jessica PatelAug 22, 2025
  If the video screen of your Lumens Security Camera flickers or freezes when connected to a MAC computer, confirm that DIP Switch-DIP4 at the base of the camera is switched to “ON” when using Mac OS X 10.10 or earlier.
R
Robert McknightAug 25, 2025
How to change pan direction on Lumens Security Camera?
- J
  Jennifer BrownAug 25, 2025
  If the pan direction is reversed when operating your Lumens Security Camera with the remote control, open the OSD menu and set the desired pan direction by navigating to [Pan Tilt Zoom] => [Pan Direction] => [Normal/Reverse].
D
danielhunterAug 28, 2025
What to do if there is no image output from Lumens Camcorder VC-B30U?
- S
  stacydavisAug 28, 2025
  If you are experiencing no image output from your Lumens VC-B30U Camcorder, first, check the power. Then, ensure that your display supports the output resolution, such as 1080p60, 1080i60, or 720p60. Finally, try replacing the cables to rule out any faulty connections.
H
Holly RossAug 31, 2025
Why Lumens Camcorder VC-B30U cannot be operated by remote control?
- L
  Luke LopezAug 31, 2025
  If your Lumens VC-B30U Camcorder isn't responding to the remote control, make sure it's connected to the computer and that video software is running. Also, prevent the VC-B30U from direct sunlight. Keep energy-saving bulbs and IR touch screens as far away as possible to avoid interference, and use only one remote control at a time.
O
Oscar SantiagoSep 4, 2025
What to do if Lumens Camcorder VC-B30U pan direction is reversed?
- T
  Teresa NewmanSep 4, 2025
  If the pan direction is reversed when operating your Lumens VC-B30U Camcorder with the remote control, open the OSD menu and set the desired pan direction by navigating to [Pan Tilt Zoom] => [Pan Direction] => [Normal/Reverse].
W
Wendy WatkinsSep 7, 2025
How to fix video screen flicker or freeze on Lumens Camcorder when connected to MAC computer?
- E
  Erica LoweSep 7, 2025
  If the video screen flickers or freezes when your Lumens Camcorder is connected to a MAC computer, confirm that DIP Switch-DIP4 at the base of the camera is switched to 'ON' when using Mac OS X 10.10 or earlier.
J
Jose MarshallSep 12, 2025
How to fix Lumens Camcorder boot without power signal?
- J
  John BakerSep 12, 2025
  Make sure you have plugged in the power cord.

Lumens VC-B30U Specifications

General

Camera Type	PTZ Camera
Sensor	1/2.8" CMOS
Effective Pixels	2.07 Mega Pixels
Resolution	1920x1080
Frame Rate	30 fps
Power	DC 12V
Audio	Built-in Microphone
Zoom	12x Optical Zoom
Pan/Tilt	Pan: -170° ~ +170°; Tilt: -30° ~ +90°
Video Output	HDMI, USB
Operating System Compatibility	Windows