Lumex LF1600 User Manual

LF1600-INS-LAB-RevE15 • LF1600 Stand Assist 12
7 MAINTENANCE
To ensure safety and proper use, perform the following steps monthly:
• Checkallfastenerstoensurethattheyaresecurelyfastenedandnowearandtear
is evident. Replace and tighten any worn fasteners before using the Stand Assist.
• Checkthetwoseatassembliestomakesuretheyarenotwornordamaged,and
that the bolts are tight. Replace any worn or damaged seat components before
using the Stand Assist.
• Checkthecasterstomakesuretheyareinworkingorderandaresecuredrmly
to the Stand Assist. Replace any worn or damaged casters before using the
Stand Assist.
If any maintenance procedure is not clear to you, ask your GF authorized distributor
for assistance.
s NOTICE: Improper maintenance can cause operating problems and may
affect your warranty.
WARNING: Unauthorized modication or the use of non-Lumex
replacement parts could change the structure of the Stand Assist, void
the warranty, and create a hazardous condition resulting in serious
personal injury.
CLEANING THE STAND ASSIST
• Wipeofftheframeatleastonceaweekwithasoftcloth.DrytheStandAssist
immediately if exposed to moisture.
• Cleantheframeeverythreemonthswithamildsoapandwatersolution.The
frame does not need to be waxed.
• Cleanupholsteryandplasticcomponentsatleastonceamonthwithamildsoap
and water solution.
s NOTICE: Do not use solvents, abrasive waxes, caustic chemicals or spray
silicone to clean the Stand Assist.
s NOTICE: Do not use abrasive cleansers to clean the Stand Assist; they
could scratch the nish.
s NOTICE: Do not use steam or high pressure cleaners to clean the
Stand Assist.

Lumex LF1600 Specifications

General

Brand	Lumex
Model	LF1600
Category	Mobility Aid
Language	English