LF1600-INS-LAB-RevE15 • LF1600 Stand Assist 11
5. Lower both of the split seat units down into position to
form a complete seat, as shown at right.
WARNING: Ensure that both seat units are lowered
and form a complete seat before having the patient
sit down on the Stand Assist.
6. Have the patient lower herself down onto the seat while
keeping her knees and shins in the kneepads, and while
continuing to hold the cross bar with both hands, as
shown at right.
7. Unlock the casters. Place both hands on the cross bar
furthest from the patient, as shown at right, and move
the Stand Assist to the new surface. Ensure that the
patient is secure and in proper position as described in
Step 6 before and during transfer, as shown at right.
8. Position the Stand Assist against the new surface,
ensuring that the patient will be in a position to sit down
rmly and safely on the transfer surface.
9. Lock the casters.
10. Have the patient pull herself back up to a full standing
position.
11. Raise the two split seat units so that they are parallel to
the side of the Stand Assist, as shown at right, to allow
the patient to lower herself.
12. Stand beside the patient as she lowers herself down
onto the new surface.
13. Ensure that the patient is safely positioned. Unlock the
casters and move the Stand Assist to storage.
To Next Page
Loading...
Need help?
General
