To Next Page
I
Ian MarshallJul 27, 2025
What to do if Lumex Splash Mobility Aid bath lift does not move?
- LlpotterJul 27, 2025
If your Lumex Mobility Aid bath lift isn't moving and there's no motor sound, here's what you can check: * Ensure the battery is fully charged. * Verify the battery is correctly inserted into the hand control cradle, making sure it clicks into place. * Confirm you're pressing the arrowhead on the UP or DOWN buttons firmly and continuously. If these steps don't resolve the issue, it may indicate a fault with the electronics, battery, or actuator, and you should contact an authorized service center.
General
