8. Optional: If desired, compensation values can be adjusted by clicking on the compensation tool button in the graph.
9. For example changing the matrix value in the 2x2 submatrix from 0.189 to 0.10 changes the compensation as
shown from the graph above (properly compensated) to the graph below (under compensated).
10. Repeat Load Compensation Sample step for each single-color compensation sample in the experiment.
For Research Use Only. Not for use in diagnostic procedures.
25
Amnis
®
FlowSight
®
Imaging Flow Cytometer User Manual
To Next Page
Loading...
Need help?
General