27
ENGLISH
CONTENTS
Important Safety Instruction.....................................27
Specifications ...........................................................28
Feature and Legend ..................................................28
1. The Headstock......................................................28
2. The Running Gear................................................28
3. The tailstock .........................................................28
4. The Saddle and the Cross-slide............................28
Unpacking and Preparing for use.............................28
Starting Procedure ....................................................29
Operation ..................................................................29
Maintenance .............................................................30
Setting and Adjustments...........................................31
Accessories...............................................................32
Wiring Diagram........................................................60
Parts Diagram...........................................................61
Parts List...................................................................62
The EC conformity declaration................................64
IMPORTANT
SAFETY INSTRUCTION
Read all instructions and warnings before
using this tool.
Operator
PLEASE REMEMBER:
1. When using electric tools, machines or equip-
ment, basic safety precautions should always be
followed to reduce the risk of fire, electric shock,
and personal injury.
2. Keep work area clean. Cluttered areas invite inju-
ries.
3. Consider work area conditions. Do not use machi-
nes or power tools in damp, wet, or poorly lit loca-
tions. Do not expose equipment to rain, keep work
area well lit. Do not use tools in the presence of
flammable gases or liquids.
4. Keep children away, all children should be kept
away from the work area.
5. Guard against electric shock. Prevent body con-
tact with grounded surfaces such as pipes, radia-
tors, ranges, and refrig erator enclosures.
6. Stay alert. Never operate if you are tired.
7. Do not operate the product if under the influence
of alcohol or drugs. Read warning labels on pre-
scriptions to determine if your judgment or reflex-
es might be impaired.
8. Do not wear loose clothing or jewelry as they can
be caught in moving parts.
9. Wear restrictive hair covering to contain long hair.
10. Use eye and ear protection. Always wear.
11. Keep proper footing and balance at all times.
12. Do not reach over or across running machines.
Before operations
1. Be sure the switch is OFF when not in use and
before plugging in.
2. Do not attempt to use inappropriate attachments in
an attempt to exceed the tool’s capacity. Approved
accessories are available from the dealer or
machine maker.
3. Check for damaged parts, before using any tool,
any part that appears damaged should be carefull-
ly checked to determine that it will operate pro-
perly and perform its intended function.
4. Check for alignment and binding of all moving
parts, broken parts or mounting fixtures and any
other condition that may affect proper operation.
Any part that is damaged should be prop early
repaired or replaced by a qualified technician.
5. Do not use the tool if any switch does not turn off
and properly.
Operation
1. Never force the tool or attachment to do the work
of a larger industrial tool. It is designed to do the
job better and more safely at the rate for which it
was intended.
2. Do not carry the tool by its power cord.
3. Always unplug the cord by the plug. Never yank
the cord out of the wall.
4. Always turn off the machine before unplugging.
If there is any question about a condition being
safe or unsafe, do not operate the tool!
Grounding Instructions
This machine has a three prong plug, the third prong is
the ground. Plug this cord only into a three-prong
receptacle. Do not attempt to defeat the protection the
ground wire provides by cutting off the round prong.
Curring off the ground will result in a safety hazard
and void the warranty.
Do not modify the plug in any way. If you have any
doubt, call a qualified electrician.
To Next Page
Loading...
