DALI Display, Manual V1.0.6 © 2016, Lunatone Industrielle Elektronik GmbH
1.5 Installation
The DALI Display does not provide any power supply for the DALI-lines. Therefore an external DALI
power supply (e.g. DALI PS) has to be installed for each DALI-line. The DC power supply (PS36V),
which is included in the delivery package, is meant to supply the display only. It is not suitable for the
supply of a DALI-Line. Instead of using a PS36V the display can also be powered via POE.
typical installation
To Next Page
Loading...