LENGTH OVERALL
PORT
COCKPIT
STEERING HELM
TRANSOM
BOW
WATERLINE
KEEL
STERN
STARBOARD
B
E
A
M
AFT
FORWARD
As a boat manufacturer, Lund builds their products to guidlines established under the
Federal Boat Safety Act of 1971. The Act is promulgated by the United States Coast
Guard who has authority to enforce these laws on boat manufacturers that sell
products in the United States. Lund ensures that all of its products comply with these
laws.
The National Marine Manufacturers Association (NMMA) provides Lund with a third
party certification. The NMMA is an organization that represents the marine industry
and assists manufacturers, boat dealers, marinas, repair yards and component suppliers
in areas of legislation, environmental concerns, marine business growth and state and
federal government agency interaction. The third party dertification that Lund
participates in, uses the well known Standards and Recommended Practices of the
American Boat and Yacht Council (ABYC).
Lund Boats participates extensively in the American Boat and Yacht Council which is
a nonprofit organization that developes and publishes voluntary standards and
recommended practices for boat and equiptment design, construction of your Lund
boat.
Finally, Lund sells their products world wide and as such must conform to the various
rules and regulations required by other countries. Most notably, are the ISO standards
in Europe which require the application of the Common European (CE) mark. This
mark, much like the NMMA certification here in the US, gives you the boat owner
Lund-01.indd 2 7/9/10 1:44 PM
https://www.boat-manuals.com/
To Next Page
Loading...