Luraco iROBOTICS 7 PLUS - Installation Instructions; III. Installation Instructions

10
• Do not store in a hot, humid, damp place nor in direct sunlight or
heat.
Cleaning Methods
• Before cleaning unplug from electrical source to avoid shock.
• Clean the chair surface with neutral or mild detergent.
• Use leather cleaner and leather conditioner.
• Dust can be cleaned off with a damp cloth using mild detergent and
let air dry.
• Do not spray pesticide on device.
• Do not use a damp cloth on the electronic components, which can
cause shock and damage.
Fig.2: Space Requirement
III. INSTALLATION INSTRUCTIONS
PLACEMENT
There must be enough space around the chair for proper operation.
There is a required minimum clearance of 32 inches (81cm) from the
front of the chair to the wall, and 27 inches (68cm) from the wall to the
backrest.
47in(119cm),Max
8
1
i
n

(
2
0
5
c
m
)
,

M
a
x

3
8
i
n

(
9
6
c
m
)
,

M
a
x

Smartphone
Pouch